IDEA

Step 1 of 4

Shown on a frame, not a hook. Features tab, the small arrow under Fillet, Chamfer. Click the outside face of the curve. Distance 0.1. Green check.

Loading the video

Speed

Steps

Picking the face chamfers both of its edges at once, so the front and back match. Chamfer the outside of a curve only: the inside of a bend carries the most load, so it stays full.

What you should seeA yellow preview on both outer edges, front and back, running along the jaws too. After the check, the outside corners are cut at 45 degrees.
- Chamfer PropertyManager(opens in a new tab)
- Creating a chamfer feature(opens in a new tab)

Chamfer the outside of the curve